PNI C120 Manual De Usuario página 5

2. b. For batteries outside the vehicle:
• Attach the red (+) clip to the red (+) terminal of the battery.
• Attach the black (+) clip to the black (+) terminal of the battery.
Note: If you have reversed the polarity, the LED on the charger will light up.
3. Connect the mains plug to the AC mains supply.
4. After charging the battery, disconnect the charger from the mains supply.
Disconnect the charger from the engine block and then from the battery.
Battery charging
Select the required charging mode:
Normal battery Maintenance
charging charging
√* (up to 12A) √ (0.8A)
* Default charging modes
1. Select the vehicle battery type:
• Standard vehicles that use lead acid battery (14.4V applied)
• Start/Stop vehicles that use AGM battery type (14.6V applied)
2. Press the arrow keys on the charger to select the icon
charging). Then, press SET.
3. Press the arrow keys on the charger to select the icon corresponding to
the desired loading mode, then press the SET button.
• - Battery charging mode
Recommended mode for standard batteries and for charging at temperatures
higher than 5°C. Increases the battery voltage to 14.4V (standard vehicles)
or 14.6V (start/stop vehicles).
• - Maintenance mode
Low charging rate 0.8A, ideal for long term seasonal connection.
5
Winter Battery
charging recondition
√ √
Start/Stop Standard
vehicles vehicles
√ √*
(Battery
User manual