Crosby IP IPBTO10 Manual Del Usuario página 4

USER MANUAL
For clamp types:
EN
04
© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way
whatever, be replicated or published without prior written permission from The Crosby Group LLC.
1. General
You have chosen a CrosbyIP clamp.
CrosbyIP clamps are the most reliable clamps available. But using reliable tools does not auto-
matically mean that practices are reliable. The people who work with clamps play an equally impor-
tant role in reliable operation. Ensure that everyone who works with CrosbyIP clamps has been
instructed in the proper application of the clamps.
CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP clamps in optimum condi-
tion and keep warranty, regular maintenance is important. Preventive maintenance and repair shall
be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty programme
and for more details on maintenance procedures, please consult www.thecrosbygroup.com/re-
sources/crosbyip-10-year-guarantee for more information.
Please read and understand these instructions before using the clamp.
2. Safety precautions
It is not
permitted to stay
„ Proper instruction for the personnel is of vital importance. This will contribute to maximum
in the danger
reliability in the working environment.
zone of the load.
„ IPBTO10 clamps may only be used per piece.
„ Hardness: The IPBTO10 is suitable up to a surface hardness of 363 HV10. For harder steel
No changes may
types contact your CrosbyIP Customer Service Centre.
be made to
„ Temperature: the operating temperature is between –40 ºC (–40 ºF) and 100 ºC (212 ºF). For
CrosbyIP
other temperatures contact your CrosbyIP Customer Service Centre.
clamps. Never
„ There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline,
straighten,
acid, alkaline).
attempt to bend
„ Loads: For proper application of the clamp consult the load diagrams 1.
or heat treat
„ Ensure that all attachments are properly fitted, secured and coupled.
parts.
„ Each time only one profile may be placed on IPBTO10 clamps.
„ Remark: when handling the load, one should ensure that the load and or clamp does not
Clamps suited
encounter obstacles which could release the load on the clamps prematurely.
for stainless
„ A clamp is a device that must be clean when used. Dirt has an adverse effect on the operation
steel, must be
and also on the reliability of the clamp. When cleaning the clamp care should be taken to
used only for
ensuring that moving parts are lubricated and the gripping surfaces are clean. Regular cleaning
handling
will enhance the life and reliability of the clamps.
stainless steel,
to avoid contact
corrosion.
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.
IPBTO10
Temporary tackle eye on HP profiles