Hortensus flexible waterhose Manual Del Propietário página 7

Thank you or purchasing this incredible hose.
This hose is a revolutionary hose that automatically expands up to 3 times its original length
when the water pressure reach 60PSI and automatically contracts back when the water in
the hose is released. The hose is extremely lightweight and will eliminate the drudgery of
using heavy, bulky conventional hoses.
Instruction
PLEASE READ THE INSTRUCTIONS AND IMPORTANT INFORAMTION BELOW
BEFORE USING YOUR HOSE.
Note: The hose works best with a spray nozzle. When used without a spray nozzle the hose
will contract several feet or more when the water is turned on. Also, it may take several
cycles of expansion and contraction for the hose to expand to its full length.
Before using this hose, please
1. Make sure the rubber washer is firmly set inside the female coupling.
2. Attach the female end of the hose to the water source.
3. Attached the hose firmly to the tap adaptor.
4. Attach the other end of the hose to the spray nozzle (or other output device).
5. Turn the water ON at the source.
6. When the hose is fully expanded, take the spray nozzle towards the target and press the
switch to control the water.
After each time of using this hose, please
1. Turn the water OFF at the spigot.
2. Release the water in the hose.
3. Keep this hose in a dry, shady, and cool place and avoid sunlight.
4. Put the hose indoors at winter or extreme cold weather.
IMPORTANT INFORMATION
THIS HOSE IS NOT INTENDED FOR DRINKING WATER USE
1. Do not run hot water or drink water through this hose.
2. Protect this hose from cut, torn or puchtured, avoid collisions with sharp objects.
3. Do not leave the water in the hose after each time of use.
4. Storage: Keep in a dry, shady, cool place and avoid sunlight.
5. Optimum working Temperature: 5℃ -45℃
6. Optimum Water Pressure: 60PSI-138PSI
7
EN