Descargar Imprimir esta página

Conel FLOW TP12-A Instrucciones De Instalación Y Operación página 23

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 93
4.
Technical data
Technical data
KBN
Pressure outlet
Free passage
Power cable
Cable length
Weight
Voltage/frequency
Type of current
Nominal current
Motor power P1
Speed
Motor protection
Plug
Protection class
Motor insulation class
Motor protection activation temperature
Maximum total head
Maximum immersion depth
Fluid temperature
Materials
Pump housing
Impeller and inlet screen
Seals
Mechanical seal
Motor shaft and motor housing
Cable
Pump curve – see page 28, figure 2.
Dimensions – see page 29, figure 3
The noise emission value is less than 70 dB (A).
FLOWTP12A
G 1¼" female thread
G 1¼" female thread adaptor
G ¾" male thread adaptor; hose connection 1" and ¾"
12 mm
Chloroprene rubber 3G 1.0
10 m
3.8 kg
1 x 230 V / 50 Hz
Alternating current
1.6 A
0.36 kW
2900 r/min
Temperature limiter built into the winding
Schuko plug
IP68
B
120 °C
6.0 m
7 m
Max. 40 °C, 60 °C for 5 minutes
Polypropylene
Polyamide
Viton
Viton
Stainless steel 1.4401 (AISI 316)
CR
23

Publicidad

loading