•
Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to battery pack. Energizing
appliance that have the switch on invites accidents.
•
Disconnect the battery pack from the appliance before
making any adjustments, changing accessories, or storing
appliance. Such preventive safety measures reduce the risk
of starting the appliance accidentally.
•
Recharge only with Scotts 20V charger (CHL82000). A
charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
•
Use appliances only with Scotts 20V lithium-ion battery
packs (BL80204). Use of any other battery packs may
create a risk of injury and fire. See Charger Manual.
•
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
•
Do not use a battery pack or appliance that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of
injury.
•
Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
•
Follow all charging instructions and do not charge the
battery pack outside of the temperature range specified in
the instructions. Charging improperly or at temperatures
outside of the specified range may damage the battery and
increase the risk of fire. See Charger Manual.
•
Have servicing performed by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
•
Do not modify or attempt to repair the appliance or the
battery pack (as applicable) except as indicated in the
instructions for use and care.
•
Do not open or mutilate battery (ies). Released battery fluid
may cause damage to the eyes, or skin. It may be toxic if
swallowed.
•
Exercise care in handling batteries in order not to short the
battery with conducting materials such as rings, bracelets,
and keys. The battery or conductor may overheat and cause
burns.
•
Disconnect battery - Disconnect battery pack from the
appliance before storing, servicing, transporting, or changing
accessories such as blades. Such preventive safety
measures reduce the risk of starting the tool accidentally.
•
Stop the unit and disconnect battery pack and switch key
when not in use. Carry or push the unit with the motor
stopped and the switch key and battery pack removed from
the mower.
IMPORTANT SAFETY INSTRUCTIONS
SAFETY RULES FOR BATTERY AND CHARGER
Model 62014S
•
Battery tools do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition.
Be aware of possible hazards when not using your
battery tool or when changing accessories. Following this
rule will reduce the risk of electric shock, fire, or serious
personal injury.
•
Do not use battery-operated appliance in rain.
•
Remove or disconnect battery before servicing, cleaning
or removing material from the gardening appliance.
•
Do not charge lawn mower in rain, or in wet locations.
•
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
•
Use of an attachment not recommended or sold by the
battery charger manufacturer may result in a risk of fire,
electric shock, or injury to persons. Following this rule will
reduce the risk of electric shock, fire, or serious personal
injury.
•
Do not service mower with battery, switch key, or charger
installed.
•
Do not use the charger when the ambient temperature is
above 104°F (40°C) or below 39°F (4°C).
•
Do not operate charger with a damaged cord or plug
which could cause shorting and electric shock. If
damaged, replace the charger with an identical charger
from an authorized service provider.
•
Do not operate charger if it has received a sharp blow,
been dropped or otherwise damaged in any way. Take it
to an authorized service center for electrical check to
determine if the charger is in good working order.
•
Unplug charger from outlet before attempting any
maintenance or cleaning to reduce the risk of electric
shock.
•
Disconnect charger from the power supply when not in
use to prevent damage to the charger during a power
surge,
•
Risk of electric shock, Do not touch uninsulated portion of
output connector or uninsulated battery terminal.
•
Do not expose charger to wet or damp conditions, Water
entering charger will increase the risk of electric shock,
•
Make sure cord is located so that it will not be stepped on,
tripped over, come in contact with sharp edges or moving
parts or otherwise subjected to damage or stress. This will
reduce the risk of accidental falls, which could cause
injury, and damage to the cord, which could result in
electric shock.
•
Keep cord and charger away from heat to prevent
damage to housing or internal parts.
•
Do not let gasoline, oils, petroleum-based products, etc.
come in contact with plastic parts. They contain chemicals
that can damage, weaken or destroy plastic.
Save these instructions.
use them to instruct others who may use this product. If you
loan someone this tool, loan them these instructions also.
5
Refer to them frequently and