Publicidad
Set up trailer operation
The Activation of the
• trailer indicator monitoring
• PDC deactivation
must be carried out using the Land Rover
service tester as follows:
20
a
b
d
e
Lamp substitution if the trailer indicators fail
The failure of a trailer indicator (right left or both sides) is reported to the driver in the towing vehicle's combi-instrument
via a text message in the display, an increase in the flashing frequency and/or a control lamp for light failure
coming on.
If an indicator fails the left or right rear tail light compensates for the faulty indicator by flashing at the correct frequency!
If the indicator is activated, the corresponding rear tail lamp on the trailer becomes the indicator
(
lamp substitution): NOTE! The lamp substitution does not work if the Hazard warning lights have been
activated.
/
87190765/16.01.2018
PF Jones Ltd, Nuttall street, Old Trafford, Manchester, M16 9JA, Tel- 0161 872 4755 email- info@pfjones.co.uk web- www.pfjones.co.uk
SDD-Software:
• Start SDD
• Select vehicle
• Service functions
• Register "Selected systems"
• System selection "Electric"
• Run "Add/remove user - trailer
coupling"
Diagnosis function of control LEDs
GN
RD
GN
RD
or
RD
RD
No CAN-Data
c
PIN 13+14
CAN-Data Wire
/31:
PIN 1
2 x B+/30:
PIN 2 + 4
Optional - IDS-Software:
• Add/Remove Accessories
• trailer module
• Add Accessories
• J_I_TRAIL_MOD_13P_12N_12S
=
Sleepmode
GN
Standby /
9/10
Publicidad
