König HAV-SB400 Manual De Usuario página 4

HAV-SB400
Soundbar
Package contents
1. Soundbar
2. Remote control (incl. AAA batteries)
3. Power adapter
4. Power cable (EU)
5. Power cable (UK)
6. AUX cable
7. RCA cable
8. Optical SPDIF cable
9. Wall mount
10. Wall screws (3x) / Wall plugs (3x)
11. Screws (wall mount / soundbar) (2x)
Description (fig. A)
The soundbar is a device with multiple built-in
speakers that generates stereo sound from a single
cabinet, dramatically improving the sound quality
without requiring loads of wires.
1. Soundbar
2. On/off switch
3. DC input
4. Audio input
5. Coaxial input
6. Optical digital audio input
7. Power indicator
8. Audio input indicator
9. Coaxial input indicator
10. Optical digital audio input
indicator
• To switch on the device, set
the on/off switch to the on
position.
• To switch off the device, set
the on/off switch to the off
position.
• Connect the power adapter
to the DC input.
• Connect the mains cable to
the mains.
• Connect an audio cable or
an AV cable to the audio
input.
• Connect a coaxial cable to
the coaxial input.
• Connect an optical digital
audio cable to the optical
digital audio input.
• The indicator comes on
when the device is switched
on.
• The indicator comes on
when an audio cable or an
AV cable is used between
devices.
• The indicator comes on
when a coaxial cable is used
between devices.
• The indicator comes on
when an optical digital
audio cable is used
between devices.
4 4
11. Remote control
12. On/standby button
13. Mute button
14. Volume + button
15. Volume - button
16. Treble + button
17. Treble - button
18. Bass + button
19. Bass - button
20. Reset button
21. Sound button: Music
22. Sound button: Movie
23. Sound button: Night
24. Source button: Audio input
25. Source button: Coaxial
input
26. Source button: Optical
digital audio input
Installation (fig. B & C)
• Refer to the illustrations to install the device
correctly.
NOTE: Remove connector protection caps from
bundled optical cable before usage.
English
• Press the button to switch
on the device.
• Press the button again to
set the device to standby
mode.
• Press the button to mute
the sound.
• Press the button again to
unmute the sound.
• Press the button to increase
the volume.
• Press the button to
decrease the volume.
• Press the button to increase
the treble.
• Press the button to
decrease the treble.
• Press the button to increase
the bass.
• Press the button to
decrease the bass.
• Press the button to reset
treble and bass back to the
default setting.
• Press the button to set the
sound to music mode.
• Press the button to set the
sound to movie mode.
• Press the button to set the
sound to night mode.
• Press the button to set the
source to audio input.
• Press the button to set the
source to coaxial input.
• Press the button to set the
source to optical digital
audio input.