König HC-SH11N Manual De Uso página 2

Features of LED Shower Head
Material:
Ambient temperature:
Ambient humidity:
Minimum water pressure:
Colour change
The colours of the LEDs change randomly.
LED quantity
12 (HC-SH11N) or 8 (HC-SH8N) high brightness LEDs with a diameter of 5 mm.
Instructions for use
Open the tap after the LED showerhead is installed, the power generation
device inside the LED showerhead will be driven and turn on the LEDs when
the water pressure reaches 0.2 MPa.
Installation
Step 1: Attach the LED shower head to the hose that connects with the water
pipe;
Step 2: Open the tap completely, then LED shower will work well.
Note: If the LED shower does not work well, please check if the water pressure
reaches 0.2 MPa.
ABS, electroplating
0–60 °C
10–90%
0.2–0.6 MPa
2
ENGLISH