4.
Slide the fan onto the extension pole. Secure the fan with the fixing knob.
7.
Operation
1.
Install the fan on a dry, level and non-slippery surface.
2.
Connect the fan to the mains.
3.
Press the on-off switch to switch on the fan. Set the timer and fan speed with the
timer and speed buttons. You can also control the fan using the included remote
control.
4.
Fix or let the fan oscillate with the oscillation button.
5.
Switch off the fan and disconnect from the mains after use.
8.
Cleaning and Maintenance
Before starting any cleaning activities:
1.
Switch off the device.
2.
Unplug the device's power cord from the outlet.
Cleaning
1.
Switch off the appliance.
2.
Unplug the appliance from the mains.
3.
Clean the inlet and outlet ribs with a vacuum cleaner.
Do not disassemble the appliance.
Do not immerse the appliance in water or any other liquid. Do not clean the appliance
with water and never allow water to enter the motor and housing.
Do not use harsh chemicals, cleaning solvents or strong detergents.
Storing
Store the device in its original package in a dry and clean place.
RED Declaration of Conformity
Hereby, Velleman NV declares that the radio equipment type [CFANAM8] is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: www.velleman.eu.
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of
this device. For more info concerning this product and the latest version of this
manual, please visit our website www.perel.eu. The information in this manual
is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright
holder.
V. 01 – 22/08/2018
CFANAM8
6
©Velleman nv