Publicidad
Especificaciones
Cargador
Protección
Modelo
Contactos
USB
Joules
2
SPH-540 USB
3
540
2.1 A 5 Vcc
Modelo
Voltaje
Frecuencia
SPH-540 USB
120 V~
60 Hz
1.
Activación
CONEXIÓN A LA LÍNEA ELÉCTRICA.
Conecte la clavija del supresor de picos a una toma de
corriente aterrizada de 120 V~, el botón se iluminará indicando
que el supresor está encendido.
2.
Luces Indicadoras
LED INDICADOR DE PROTECCIÓN.
Este led indica que todos los componentes de su supresor de
picos están funcionando correctamente, proporcionando
protección a su equipo. Si el led no enciende, indica que algún
componente del supresor se ha dañado, el supresor seguirá
funcionando, sin embargo, la protección es nula o limitada.
Debe llevar su supresor inmediatamente a un centro de
servicio autorizado Koblenz.
3.
Conexión de equipos
al supresor de picos
Conecte los equipos a su supresor de picos, incluso dispositi-
vos con enchufes de 2 alambres.
No conecte cables de extensión a esta unidad. No sobrecar-
gue el protector, la carga total de todos los contactos no debe
exceder de 15 A.
4.
Conexión a puertos USB
Este modelo cuenta con dos puertos de alimentación USB de
2.1 A 5 Vcc en la parte frontal para alimentar o cargar sus
dispositivos USB móviles tales como reproductores de MP3,
teléfonos celulares inteligentes, etc.
Estos puertos son compatibles con la mayoría de los
dispositivos USB, sin embargo, para una mejor conectividad,
recomendamos preferentemente conectar sus equipos de la
siguiente manera:
Puerto USB A: compatible con dispositivos Apple
Puerto USB B: compatible con dispositivos Android
Nota: Algunos dispositivos requieren de una fuente de
alimentación USB propietaria o conectarlos directamente al
tomacorrientes.
Apple
es una marca de Apple Inc.
®
Android
es una marca de Google Inc.
™
Specifications
Filtro de
Ruidos
LED
Model
(EMI/RFI)
1
30 dB
SPH-540 USB
Protegido
Corriente
15 A
1.
Activation
CONNECT YOUR KOBLENZ SURGE SUPPRESSOR TO THE
AC POWER LINE, the light on the switch will turn on.
This Koblenz surge suppressor must be plugged into a
V~ grounded outlet. Grounding provides a path of resistance
for electricity to reduce the risk of shock.
2.
Diagnostic Indicator Lights
PROTECTED LED.
When the green light is on it indicates that the surge suppres-
sor components are intact and providing complete protection.
If the light is not illuminated, some of the components are not
functioning and have to be replaced.
Contact a Koblenz authorized Service Center. You may still use
the unit. However, connected equipment will be protected
from spikes and surges at a lower level than normal.
3.
Connect equipment to
your surge suppressor
Your surge suppressor has an intelligent outlet design, both
transformers and standard plugs can be connected. Connect
the AC power cords of your electrical equipment including 2
wire devices.
Do not OVERLOAD the surge suppressor. Do not exceed a
total load of 15 A for all outlets.
4.
USB-Charger
This model has two 2.1 A 5 Vdc USB chargers located on front
panel for conveniently powering / charging mobile USB
devices such as MP3 players, smartphones, etc.
These chargers support most USB devices, however, for
®
better connectivity, we preferably recommend connecting your
™
equipment as follows:
USB port A: compatible with Apple
USB Port B: compatible with Android
Note: Some devices require a proprietary USB power supply
or connect directly to the outlets.
Apple
is a trademark of Apple Inc.
®
Android
is a trademark of Google Inc.
™
Noise
USB
Joules
Outlets
filtration
Charger
Protection
(EMI/RFI)
2
3
540
30 dB
2.1 A 5 Vdc
Model
Voltage
Frequency
Current
SPH-540 USB
120 V~
60 Hz
15 A
devices
®
™
devices
WARRANTY
This warranty gives you legal rights, and you may also have other rights which
vary from state to state. This products is warranted agains malfunctions and
defects in material and workmanship for a period of 1 year.
LED
THIS WARRANTY SHALL NOT APPLY
1
To any products or parts thereof which have been damaged by tampering,
Protected
misuse or abuse or which have been altered or repaired by an unauthorized
person or service center. Once the device has protected equipment from
surges and protected light does not illuminate.
FOR REPAIR
The inoperative smartphone power station must be delivered with shipping
and delivery charges prepaid, together with satisfactory evidence of the
purchase date to the dealer from whom it was purchased. Koblenz will either
repair or replace the unit at its election during the warranty period.
THE FOREGOING OBLIGATIONS ARE IN LIEU OF ALL OTHER OBLIGATIONS
120
AND LIABILITIES INCLUDING NEGLIGENCE AND STATE KOBLENZ'S
ENTIRE AND EXCLUSIVE LIABILITY AND PURCHASER'S EXCLUSIVE
REMEDY. KOBLENZ WILL IN NO EVENT, BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES WHATSOVER, AND KOBLENZ LIABILITY UNDER NO
CIRCUMSTANCES WILL EXEED THE CONTRACT PRICE FOR THE GOOD
OR PARTS FOR WHICH LIABILITY IS CLAIMED.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply
to you.
THORNE ELECTRIC, CO.
P.O. BOX 18363
San Antonio, TX.
78218-0363 U.S.A.
PH. (210) 590-1225
FAX. (210) 590-1258
Made in China
Publicidad
