Publicidad
Idiomas disponibles
Idiomas disponibles
TETRA HYBRID HD CCTV CAMERA,
MINI BULLET TYPE
User Manual
Before to use the product, please read carefully this manual to avoid any malfunction.
The info in this manual is shown as reference. Due to updates can exist differences. Consult our website
www.steren.com to obtain the current version of this manual.
IR LED (Night vision)
Lens
Sensor
Mounting base
Video connector
Input connector
MONITOR
ANALOGUE / DIGITAL SELECTION MODE
This camera has the tetrahybrid technology, and it's possible to connect any analogue or
digital DVR.
Remove the cover from the joystick.
AHD
Press and hold the joystick for 5 seconds, in the
CVBS
TVI
direction that shown in the image, to choose the signal
according with the DVR used.
CVI
MENU SETTINGS DESCRIPTION
[AE] Brightness, exposure and gain
[WB] White balance
[DAY-NIGHT] Mode
[IMAGE ENHANCE] Best image
[VIDEO SETTING] Contrast, sharpness, color gain, DNR, video format and dwdr
[LANGUAGE] English, Chinese, Spanish, Russian and Italian
[FUNC] Function
[RESET] Factory restart
[SAVE-EXIT] Save the changes and exit
[EXIT]
PARTS
Nuts of adjust
Analogical or digital
selector / Menu
CONNECTION
DVR
V0.1 / 1018v
• This device cannot be used by people with different abilities, unless they have preparation
and supervision.
• The children should be supervised to ensure that don't use it like a toy.
• Don't use or store the device in places where exist water or splashes
• Don't install near of the heaters or electromagnetic noises. (electric engines, electrified
fences, outlet switches, etc.).
• Do not install it in outdoor.
• Do not install the cables inside of pipes where there electric wires, this may cause that the
image will be diffuse.
• Use CAT5E UTP cable not longer than 100 m.
• If you use a coaxial cable, the length do not must exceed 50 m.
• Connect the camera to battery backup, to protect it of the electric overload and still working.
1. Select the place where you want install the camera. It's recommendable that will be
over a solid surface (wall, ceiling, under outgoing).
2. Use the template (included) to make the drill
Case
marks.
3. Drill and insert the anchors and
screws.
4. Screw the base firmly.
5. Use the whrech to adjust the camera's angle vision.
JOYSTICK USING
SETTINGS MENU
MAIN MENU
AE
AWB
DAY-NIGHT
IMAGE ENHANCE
VIDEO SETTING
LANGUAGE
FUNC
RESET
SAVE-EXIT
EXIT
Input: 12 V - - - 1 000 mA
Minimum light: 0.01 lux/F 1.2
Format: AHD 1 920 x 1 080
Image sensor: colour CMOS
Video output: BNC
Resolution: 2.0 MP
Operating temperature: -10 to 50 °C
Specifications may change without notice
CAUTIONS
INSTALLATION
Press the joystick once to enter in
this menu. Use the joystick to move
and edit options.
ENGLISH
SPECIFICATIONS
Publicidad
