Steren BAF-500 Manual De Instrucciones página 46

Indicators: These LED indicators will light red when there is a high level
audio signal at the indicated frequency. These can be used to detect an audio
feedback frequency and then lower the appropriate EQ fader to remove the
unwanted feedback.
9.- Headphones volume
This control allows you to configure the headphones volume level.
10.- MP3 volume
Adjust the volume level of the USB and SD/MMC ports.
11.- Channel 1-2 Cannon and 6.3mm inputs
The Cannon and 6.3 mic inputs are an electronically balanced Cannon type
designed to accept mic level signals from any balanced or unbalanced low
impedance microphone.
12.- Channel 3 6.3mm input
The 6.3 input is balanced, designed to accept mic level signals.
13.- Channel 4-5 stereo RCA inputs
The stereo RCA line level inputs can be used for connecting CD players,
Tape Decks, and other audio equipment with line level outputs.
14.- Aux RCA output
The Left and Right RCA outputs provide line level signal output to a cassette
deck, home audio equipment, or a recording device.
18