MOA AC199WBR Manual De Instrucciones página 3

CONTROL PANEL
1.ON/OFF: Press the "ON" button on the control panel or press the
ON/OFF button on the remote control to turn the unit on. The unit will
start at intermediate speed and then drop to slow speed. To switch back
to the standby position, simply press the OFF button on control panel or
press the ON/OFF button on the remote control.
2. Speed: Wind speed can be adjusted to 3 levels as low---med—high
by pressing the 'Speed' button. Each time the 'Speed' button is pressed,
an icon will appear on the LED screen indicating the current speed
level.
3. Wind: Press the 'Wind' button to choose the wind type. Each time
this button is pressed, an indicator will light on the screen to indicate
the type of wind. There are 3 types of winds to choose: Normal—
Natural—Sleep
4. Timer: Press 'Timer' button to set the fan running time between 1-7
hours, which switches the unit to standby after preset time. Each time
the button is pressed, the hours will increase one by one and the time
indicator will light on the screen. Timing 1 hour, display 1 H.Timing
2 hours, display 2 H. Timing 3 hours, display 2H and 1H.Timing 4
hours, display 4H. Timing 5 hours, display 4H and 1H. Timing 6 hours,
display 4H and 2H. Timing 7 hours, display 4H, 2H and 1H.
5. Swing: Press 'Swing' button to change the wind direction. The swing
icon will appear on the screen when the function is activated. Press the
button again to stop the oscillation. The vertical direction of air flow can
be adjusted manually by directing the outlet louvers up and down.
6. Cooler: To activate the air cooler function, please press the 'Cooler'
button. Water pump will take the water from the tank and pour it onto
the cooling pad. Cooling pad absorbs the heat of the water and the
evaporated air is blown out by the help of fan.
Aircooler - English Instruction Manual
EN
3