Eldom mono PH11 Instrucciones De Uso página 9

GENERAL DESCRIPTION
1. Thermostat
2. Heating plate
3. Control light
4. Housing
TECHNICAL DATA
- power: 1200W
- supply voltage: 230V ~ 50Hz
USING THE APPLIANCE
The ceramic cooker allows to prepare food in many different ways (cooking, frying, etc.)
The use of infrared lamp in appliance allows to reach rapidly required temperature,
which saves time and reduces power consumption.
Before operating and plugging in the appliance, set the thermostat (1) in the position "
appliance switched off ).
Position the appliance on a level, dry, stable and high-temperature resistant surface. The housing (4)
heats up considerably when operated. Thus, the space of at least 5 cm from the sides of the device
should be provided.
To ensure free and safe access to the appliance, place it at a proper height.
- plug in the appliance
- place a dish with products on the heating plate (2)
- switch on the appliance selecting the working temperature of the thermostat (1) Thermostat
enables smooth adjustment of the temperature.
Settings 1-3 correspond to the lower temperature proper for heating meals.
Settings 4 - 5 - high temperature intended for cooking. Operation of the appliance is signalled by the
control light (3).
When the appliance is no longer used, set the thermostat (1) in the position "
appliance.
During the first activation of the appliance, a specific smell can be emitted from the heating
elements and the insulation. It is a normal occurrence.
In order to ensure safety and high efficiency of the operation, use only dishes with flat bottoms and
of a proper diameter which guarantee stability and good contact of the dish with the heating plate
INSTRUCTION MANUAL
ELECTRIC COOKER PH11
4
EN
2
3 1
" (the
" and unplug the
9