16
DVR250
Connecting the DVR250-DT Desktop Controller
(when you have purchased the DT Desktop Controller version)
Getting the Desktop Controller up and running couldn't get any easier. Plug the included
USB cable into the unit's rear micro-USB port, and connect the other end to a free USB
port on your computer. The Desktop Controller is bus powered so no other power cables
are necessary, and no additional drivers need to be manually installed.
DVR250-DT
Laptop
The Desktop Controller will light up upon successful connection. You can now apply the
plug-in to a channel in your DAW to begin using the effect. This process may vary slightly
depending on your software, but generally should require these steps:
• Select a channel or bus in your DAW to which you would like to add the effect Access
the mixer page where you should see a section dedicated to effect slots
• Open the menu where you can select from a list of effect types, which probably
includes many stock plugins that are included with the DAW. There should be
submenu to view general VST/AU/AAX options.
• The plug-in will likely be found in a dedicated TC Electronic folder. Select the
DVR250 and it will now be added to the signal chain.
Double click on the effect slot that contains the DVR250 to view the plug-in UI. There
should be a green link icon at the bottom, and text that indicates successful connection
between the plug-in and the Desktop Controller.
Note: The iLok License Manager needs to be installed on your computer also if you have
purchased the DT Desktop Controller version. In this case you don't need to create an iLok
account or activate any license.
Operating the DVR250
After you have installed the plug-in, and either activated the iLok license or connected
the DVR250-DT Desktop Controller via USB, you can begin inserting the plug-in to
your tracks.
Adjustments to the effect are done in two ways. Either by using the plug-in user interface
or via the physical Desktop Controller.
Download the full user manual from www.tcelectronic.com/dvr250-dt/support/ to learn
about all the details of both the plug-in and the Desktop Controller functionality.
17
Quick Start Guide