CONVERTER REVOLUTION
Before you connect up, authorise the use of a PRO gamepad in the settings of the Switch console:
Menu Home
Console settings
>
Nb. if you do not request authorisation, you may receive a Nintendo Switch 2011-0304 error code
Connect the converter to the console via the USB cable provided.
The white LED indicates that the converter has been connected.
Connect your keyboard to the converter.
The LED flashes yellow once...connection in progress! The white LED appears... the peripheral device has been connected
Connect your mouse to the converter.
The LED flashes yellow once...connection in progress! The white LED appears... the peripheral device has been connected.
Final stage
Press the keys
The red LED indicates that your keyboard and mouse have been connected.
Nb. if your switch enters sleep mode, it will not be reactivated until you complete this stage again.
DEFAULT KEYS
MOUSE
ZL
RIGHT CLICK
Q
L
A
W
Z
A
D
Q
S
LEFT
L3
SHIFT
F1
1
2
3
Customise keys
To customise your keys, download the PC application from
the following download centre: empiregaming.eu
BACK TO SUMMARY
Gamepads & Sensors
Select Connection by PRO gamepad cable
>
>
CTRL + [ 2 " ]
on the keyboard you have just connected to activate Switch mode.
CAPS
TAB
LOCK
NINTENDO SWITCH
Select YES
>
TIPS
Adjust the speed of the mouse
MOUSE
ZR
LEFT CLICK
Press the F3 key of your keyboard
E
to reduce it.
R
Press the F4 key of your keyboard
to increase it.
F
X
SPACE
Adjust the aim sensitivity
A
Press the 5 key of your keyboard
C
B
to reduce it.
R
Y
Press the F5 key of your keyboard
to increase it.
Adjust the headset volume
MOUSE
Press the Ctrl + F1 keys of your keyboard
R3
WHEEL CLICK
to reduce it.
Press the Ctrl + F2 keys of your keyboard
to increase it.
ESC
To turn off sound to the headset
and microphone, press the button
under the converter.
Important
Check that the USB cables you use are compatible in terms of data
(Sync.) and loading. Specialised recharging cables are not supported.
™
EN
OE-CV-61
2