Voltage Measurement; Insulation Resistance Measurement - EGAmaster EGATronik Serie Manual De Instrucciones

A. Voltage Measurement
Measurement Range
Resolution
Accuracy
Output Voltage
Display Range
Open Circuit Voltage
Test Current
Short Circuit
Accuracy
IMPORTANT!
The maker will not take responsibility for damage or malfunction as a result of the device being
incorrectly used or, applied for a purpose for whith it was not intended.
According to Waste Electrical and Electronic Equipment directive (WEEE), these ones must
be collected and arranged separately. If you have to throw them out, please, do not use the usual
rubbish. Please, contact your distributor for free recycling.
The maker guarantees to the device owner 12 months against any manufacture defect.
This guarantee do not cover the parts wich are consumables.
Note: to apply the guarantee its necesary to send the "GUARANTEE CERTIFICATE" duly filled
within one week after purchased the machine to the maker.
DC Voltage
±30 ~ ±1000V

INSULATION RESISTANCE MEASUREMENT

500V
3MΩ ~2GΩ
(less than 3M, buzzer
beeps and 0MΩ will be
shown)
DC500V±10%
0.9mA~1.1mA
@500kΩ
100MΩ ~ 10GΩ : ± (5%+1)
10GΩ to 20GΩ : ± (10%+1)
NOTES
GUARANTEE
1V
±(2%+3)
1000V
5MΩ ~4G
(less than 5M, buzzer
beeps and 0MΩ will be
shown)
DC1000V±10%
0.9mA~1.1mA @1MΩ
Around less than 1.8 mA
3MΩ to 99.9MΩ : ± (3%+1)
AC Voltage
30V~750V (50/60Hz)
2500V
25M ~20G
(less than 25M, buzzer
beeps
and 0MΩ will be
shown)
DC2500V±10%
0.9mA~1.1mA
@2.5MΩ
17