Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
Caulking around the light
7
fixture
CAUTION: Failure to completely caulk around the light
fixture's mounting plate (D) could result in water seepage
into the light fixture (B) and/or junction box.
Caulk around the mounting plate (D) and
mounting surface with silicone sealant (not
included).
Operation
1
Adjusting the lamp heads
WARNING: Risk of fire. Keep the lamp heads at least
2 in. (51 mm) from combustible materials.
CAUTION: Keep lamp heads 30° below horizontal to
avoid water damage and electrical shock.
Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
If needed, gently grasp the lamp heads (A) and
tilt them up or down or side to side to adjust
the light coverage area.
2
A
7
D
Rotating the sensor controls
downward
CAUTION: To avoid water damage and risk of electrical
shock, the motion sensor controls must be facing the
ground when installation is complete.
Rotate the motion sensor (C) so the controls
face toward the ground.
C
Please contact 1-866-308-3976 for further assistance.
HOMEDEPOT.COM
Publicidad
