Motion RSD001 Manual De Instrucciones página 4

designed to provide reasonable protection against harmful
interference when the equipment is operated in a
residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer's
instruction manual, may cause interference with radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in
which case you will be required to correct the interference
at your own expense.
Class B Equipment: This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer's
instruction manual, may cause interference with radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, you are encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
The following information is provided on the device or
devices covered in this document in compliance with FCC
regulations:
Motion R12- Series Secure Mobile Dock and R12-Series
Secure Mobile Dock with Blank-IT Swingaway Model
Number: RSD001
Company name: Motion Computing, Incorporated
8601 Ranch Road 2222, Bldg 2
Austin, TX 78730
Telephone: 512-637-1100
Fax: (512) 637-1199
Manufacturer name: Sinbon Electronics Co. Ltd.
4F-13, No. 79, Sec. 1, Hsin Tai Wu Rd.
Hsi-Chih Dist
New Taipei City 221, Taiwan
Telephone: (886-2) 2698-9999
Fax: (886-2) 2698-9660
Modifications
The FCC requires that you be notified that any changes or
modifications made to this device that are not expressly
approved by Motion Computing, Inc. may void your
authority to operate the equipment.
4
Cables
Connections to this Secure Mobile Dock must be made
only with shielded cables. This reduces possible
interference with radio communications and complies with
FCC Rules and Regulations for this EMC classification.
IC notice (Canada only)
Canada ICES-003, Class/Classe B
Unintentional Emitter per ICES-003
Motion Computing Secure Mobile Docks are classified by
the Industry Canada (IC) Interference-Causing Equipment
Standard #3 (ICES-003) as Class B digital devices.
This Class B (or Class A, if so indicated on the registration
label) digital apparatus meets the requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi
indiqué sur l'étiquette d'enregistration) respecte toutes les
exigences du Règlement sur le Matériel Brouilleur du
Canada.
The term "IC" before the equipment certification number
only signifies that the Industry Canada technical
specifications were met.
Conformité Européne (CE) European
Union
Unintentional Emitter
The (Conformité Européne) symbol found on the R12-
Series Secure Mobile Dock indicates compliance to the
EMC Directive and the Low Voltage Directive of the
European Union. This means that the Secure Mobile Dock
meets the following technical standards:
• EN 55022 (CISPR22) – Limits and Methods of
Measurement of Radio Interference Characteristics of
Information Technology Equipment
• EN 55024 (CISPR24) (IEC 61000 4-2, 4-3, 4-3, 4-5, 4-6, 4-8,
4-11) – Information Technology Equipment-Immunity
Characteristics – Limits and Methods of Measurement
• EN 61000 3-2 (IEC 61000 3-2) – Electromagnetic
compatibility (EMC) – Part 3: Limits – Section 2:
Limitations for harmonic current emissions (Equipment
input current up to and including 16 A per phase)
• EN 61000 3-3 (IEC 61000 3-3) – Electromagnetic
compatibility (EMC) – Part 3: Limits – Section 3:
Limitations of voltage fluctuations and flicker in low-
voltage supply systems for equipment with rated
current up to and including 16 A
• EN60950-1 (IEC 60950-1:2006+A11:2009) – Safety of
Information Technology Equipment.
This product is in compliance with Directive 2011/65/EU of
the European Parliament and of the Council set into force
in June 2011. This Directive set into force procedures
regarding the restriction of the use of certain substances in
electric and electrical equipment (ROHS).
RSD001 Safety and Regulatory Guide