Publicidad
957KFSI1 Somerset Side Chair
ASSEMBLY INSTRUCTIONS
A
A
FIG. 1
1) Glue three Wood Dowels (C) into each of the upper holes in the Left Leg Assembly
(1) as shown in FIGURE 1. Attach the Back (3) to the leg assembly with two dowels
and two Hex Bolts (A). Tighten bolts with the Hex Wrench (E).
Attach the Front Apron (4) to the leg assembly over the dowel and fasten in place
with Hex Bolt.
Glue three Wood Dowels (C) into the upper holes in the Right Leg Assembly (2)
as shown in FIGURE 1. Attach the leg assembly to the front apron and back as
before.
FIG. 2
2) Slip the Seat (5) down between the legs onto the seat braces. Attach to the leg as-
semblies with 04x40mm Screws (B) through the two predrilled holes in each end
of seat into the frame as shown in FIGURE 2.
TOOLS REQUIRED:
Phillips Screwdriver, Outdoor Wood Glue.
C
C
C
A
A
A
C
C
B
B
A
A
C
957KFSI1 - Page 3
E
Publicidad
