Descargar Imprimir esta página

AIR SYSTEMS INTERNATIONAL MP-2H Manual De Instrucciones página 2

Ocultar thumbs Ver también para MP-2H:

Publicidad

Idiomas disponibles

Idiomas disponibles

Dimensions
Weight
Frame
Cylinder Straps
Whip Assemblies
Bleeder Valves
Check Valves
Low Pressure Whistle
Regulator
Relief Valve
Respirator Connections
Intrinsically Safe
Air Systems' manufactured equipment is warranted to the original user against defects in workmanship or ma-
terials under normal use for one year from the date of purchase. Any part which is determined by Air Systems
to be defecti ve in material or workmanship will be, as the exclusive remedy, repaired or replaced at Air Sys-
tems' opti on. This warranty does not apply to electrical systems or electronic components. Electrical parts are
warranted, to the original user, for 90 days from the date of sale. During the warranty period, electrical com-
no otHer wArrAnty, exPreSSeD or imPlieD, AS to DeScriPtion, QUAlity, mercHAntAbility, FitneSS
For A PArticUlAr PUrPoSe, or Any otHer mAtter iS GiVen by Air SyStemS in connection Here-
witH. UnDer no circUmStAnceS SHAll tHe Seller be liAble For loSS oF ProFitS, Any otHer Direct
or inDirect coStS, exPenSeS, loSSeS, or DAmAGeS AriSinG oUt oF DeFectS in, or FAilUre oF tHe
The purchaser shall be solely responsible for compliance with all applicable Federal, State and Local OSHA and/
or MSHA requirements. Although Air Systems Internati onal believes that its
products, if operated and maintained as shipped from the factory and in accordance with our "operati ons
manual", conform to OSHA and/or MSHA requirements, there are no implied or expressed warranti es of such
compliance extending beyond the limited warranty described herein. Product designs and specifi cati ons are
Air leaks are not covered under warranty except when they result from a defecti ve system component, i.e. an
on/off valve or regulator or upon initi al delivery due to poor workmanship. Air leaks due to poor delivery or
damage will be covered under delivery claims. Minor air leaks are part of routi ne service and maintenance and
are the responsibility of the customer just as are fi lters and oil changes.
SPeciFicAtionS
Rated @ 5000 PSI (345 bar) with a 4:1 Safety Factor
Models MP-2H, MP-2HCYL, MP-4H, and MP-4HCYL Only
wArrAnty DiSclAimer
ponents will be repaired or replaced at Air Systems' opti on.
ProDUct or Any PArt tHereoF.
subject to change without noti ce. rev. 2, 12/98
2
35"H x 21"W x 15.25"D
38.5 lbs./17.25 kg
Powder Coated Steel
4 Adjustable Straps
Allows Depressurization of CGA Connection
Allows Independent Cylinder Operation
Pneumatic - set at approximately 5000 PSI
0-5500 PSI (379 bar) Inlet
0-125 PSI (8.6 bar) Outlet
125 PSI (8.6 bar) ASME Preset
MP-2L, MP-2LCYL, MP-2H, MP-2HCYL - 2 Fittings
MP-4H and MP-4HCYL - 4 Fittings
Yes, No Electronic Devices

Publicidad

loading

Productos relacionados para AIR SYSTEMS INTERNATIONAL MP-2H

Este manual también es adecuado para:

Mp-2lMp-4hMp-2lcylMp-2hcylMp-4hc