Página 1
Instrucciones de Ensamblaje 120mns 4 Door Cabinet SAVE THESE INSTRUCTIONS Gabinete de 4 puertas GUARDE ESTAS INSTRUCCIONES C1910163 Email or call customer service for help first. Envie correo electrónico o llame al servicio para Do Not Return! obtener ayuda primero. No Vuelvas!
Página 2
Helpful advice Consejos útiles 1. Follow the assembly instructions carefully. 1. Siga a tentamente las instrucciones de montaje. 2. Check to ensure all parts, fasteners and hardware 2. Asegúrese de que la caja contiene todas las piezas, are present. sujeciones y materiales. 3.
Página 3
Hardware/Lista de materiales ITEM IMAGE DESCRIPTION DESCRIPCIÓN QUANTITY Wood dowel Perno madera Cam bolt Perno metálico Cam lock Bloqueo metálico Shelf support Perno Sticker Pegatina Φ3×12 mm Screw Φ3×12 mm Tornillo Hinge Bisagra...
Página 4
Hardware/Lista de materiales ITEM IMAGE DESCRIPTION DESCRIPCIÓN QUANTITY Φ4×14 mm Screw Φ4×14 mm Tornillo Expansión de plástico Wall anchor Handle Tirador M4×24 mm Bolt Φ4×20 mm Tornillo Φ4×50 mm Screw Φ4×50 mm Tornillo Door stop Tope de puerta Wood dowel (Large) Perno madera (Larga) Double head bolt Biela de doble cabeza...
Página 5
WARNING This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture ADVERTENCIA Este producto puede exponerlo a sustancias quím icas, incluyendo el formaldehído, el cual es conocido en el estado de California como causante de cáncer, defectos de nacimiento u otros daños reproductivos.
Página 6
Necessary tools/Herramientas necesarias Glue not enclosed (We recommend to apply some glue into holes before inserting wood dowels.) Colle non fournie (Nous vous recommandons d’appliquer quelques gouttes de colle dans les trous avant Glue not included ( We recommend to apply some glue into holes before inserting wood dowels .) d’y introduire les chevilles de bois.) Cola, no incluida (Le recomendamos colocarunas gotas de cola en los ori cios antes de insertar las clavijas de madera.) madera.)
Página 7
Attention: In order to help your assembly, do not lock the screw tightly until you have assembled all the other parts. Atención: Con el fin de facilitar su montaje, no apretar el tornillo firmemente hasta que haya ensamblad o todas las otras partes. Step 1/Paso 1 Insert 2 wood dowels (A) and 3 cam bolts (B) into gable left (2).
Página 8
Step 3/Paso 3 Insert 8 wood dowels (A) into the holes on the edge of bottom (4). Insert 10 cam bolts (B) into top (1). Hammer 2 door stops (M) into the holes on the top (1). Inserte 8 Pernos maderas (A) en el Tablero inferior (4). Inserte 10 Pernos metálicos (B), 2 Topes de puerta (M) en el Panel superior (1).
Página 9
Step 5/Paso 5 Insert 2 hinges (G) into the door panel (8) with 4 screws (H). Align handle (J) with the hole on the door panel (8), secure with 1 screw (K). Repeat this step three times. Insert 2 hinges (G) into the door panel (9) with 4 screws (H). Align handle (J) with the hole on the door panel (9), then secure with 1 screw (K).
Página 10
Step 7/Paso 7 Connect divider (13) and bottom (4) with 2 screws (L). Conecte el Tablero inferior (4) al Tablero vertical (13) con 2 Tornillos (L). L x 2 Step 8/Paso 8 Connect back rail (12) and divider (13) with 1 cam bolt (C) ,1 wood dowel (N) and 1 double head bolt (O). Connect bottom (4) and gable left (2) with 2 cam bolts (C).
Página 11
Step 9/Paso 9 Connect back rail (12) and divider (13) with 1 cam lock (C). Connect gable right (3) and bottom (4) with 2 cam locks (C). Conecte la Barra posterior (12) e Tablero derecho (3) al ensamblaje con 3 Bloqueos metálicos (C). C x 3 Step 10/Paso 10 Attach top (1) into the stand assembly with 10 cam locks (C).
Página 12
Step 11/Paso 11 Insert back panels (10) (11) into the stand assembly with 33 screws (F). Fije los Tableros posteriores (10) (11) al ensamblaje con 33 Tornillos (F). F x 33 Step 12 /Paso 12 Attach 2 door panels (8) to the gable left (2) and divider (13) with 16 screws (H). Fije las Puertas (8) al ensamblaje con 16 Tornillos (H).
Página 13
Step 13/Paso 13 Attach door panel (9) to the divider (13) with 8 screws (H). Attach door panel (8) to the gable right (3) with 8 screws (H). Fije las Puertas (9) (8) al ensamblaje con 16 Tornillos (H). H x 16 Step 14/Paso 14 Insert 16 shelf supports (D) and put 4 adjustable shelves (7) into the stand assembly.
Página 14
Step 15/Paso 15 Insert 4 wall anchors (I) into the holes on the wall. Insert 4 screws (L) into back rail (12) to secure the product to the wall. Perfore 4 agujeros en la pared, Golpee 4 Expansiones de plástico (I) en los agujeros de la pared, bloquee las Barras posteriores (12) al pared con 4 Tornillos (L).
Página 15
Step 16/Paso 16 Cover visible cam lock holes and screw holes with 10 stickers (E). Pegue las Pegatinas (E). E x 10...
Página 16
Maximum weight capacities/Capacidades de carga máxima 45 kg 99 lbs. 15 kg 33 lbs. 15 kg 33 lbs. 15 kg 33 lbs. 18 kg 40 lbs. 15 kg 33 lbs. 18 kg 40 lbs. WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items.
Página 17
1 YEAR WARRANTY BASIC WARRANTY: Homestar® furniture is warranted by Homestar Corporation (Homestar) to the original purchaser for a period of one year from the date of purchase, subject to the following conditions and limitations. 1. Install and operate this item in accordance with the Installation and 6.