Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Mounting the hardware
Align the fixture pan (A) over the outlet
box.
Mark the location of the keyhole slots of
the fixture pan (A) onto the ceiling.
Remove the fixture pan (A) from the
ceiling.
Drill a 1/4 in. (6.4 mm) hole at the narrow
end of each keyhole slot marking on the
ceiling.
Carefully hammer a ceiling anchor (BB)
into each drilled hole.
Screw an anchor screw (CC) into each
remaining ceiling anchor (BB), but allow a
small portion of the anchor screw (CC) to
remain away from the ceiling.
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
Attach the lanyard on the fixture pan (A)
to the outlet box using a lanyard screw
(DD).
Pull the power supply wires out from the
outlet box.
Connect the black supply wire to the
black fixture wire using wire nuts (AA).
Connect the white supply wire to the
white fixture wire using wire nuts (AA).
Connect the fixture ground wire and the
supply ground wire together using a wire
nut (AA).
Wrap all wire connections with electrical
tape for a more secure connection.
BB
AA
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
BB
CC
DD
HAMPTONBAY.COM
Publicidad
