device that transmits or receives and you are experiencing difficulty in
operating the system, the device(s) may be too close to either the WiSight
Monitor or Camera.
Change the placement to at least three feet between devices and re-test for
proper operation.
T
S
ROUBLE
HOOTING
Monitor will not turn on.
Monitor displays "No Signal".
Intermittent reception.
- Check power cord connection at monitor
and 12VDC socket.
- Check fuse in cigarette socket adapter.
- Check 12VDC power at camera.
- Make sure antenna is tight and pointed
correctly.
- Make sure monitor is set to AV1.
- Try manually pairing the system.
see pairing Process for instructions.
- Make sure antenna is tight and installed
vertically.
EN-08