Publicidad
STEP 4A- ATTACH PANELTO WALL PLATE & ADJUST TILT ANGLE
Hang vertical rails with monitor attached
Cuelgue con el monitor adherido.
Accrochez avec le moniteur installé.
Pull spring lock
cord down and
gently push
bottom of panel
to wall and
release spring
lock. Panel is
now locked on
to wall plate.
Rotate lever clockwise to hold desired tilt
or
D
or
1/2"
Tilt
-3°~12°
Rotate lever
clockwise
to hold
desired tilt
Tilt
-3°~12°
P10
Publicidad
