Glacier bay HD67529W-6204 Guía De Instalación Y Cuidado página 7

Installation (continued)
7
Adjusting the length of lift rod strap
□
If the pop up lift rod strap (K) is interfering with your installation, as shown in the Fig 1, the lift rod strap (K)
can be cut shorter.
□
Once you have identi ed the proper hole in the lift rod strap (K) that is necessary for your installation, you
may cut off the bottom portion (1) of the lift rod strap (K) by snapping off with pliers or cut off with a saw
at the cutting point (2), as shown in the Fig 2. Ensure the clip (L) does not slide off the lift rod strap (K).
Fig 1
8
Checking the operation of the
pop up
□
Operate the lift rod (M) up and down to verify
that the stopper (D) opens and closes correctly.
K
K
7
K
L
Please contact 1-855-HD-GLACIER for further assistance.
1
2
Fig 2
M
D
HOMEDEPOT.COM