midocean MO9663 Manual Del Usuario página 2

MO9663
EN
Instructions:
1. Charging electronic digital equipment:
Please use the original cable of your electronic digital products for
connection. The power bank will automatically charge up your
electronic digital products once they are connected to each other.
(Please make sure the power bank is charged for best
performance.) Unplug the charging cable after the digital product
is fully charged.
Caution: The output power of the power bank is 5V/1A , please
check input specification of your product before charging with the
power bank.
2. Check battery capacity in power bank:
The White LED lights indicate battery capacity reminded in power
bank as follows – 4 lights = 100%; 3 lights = 75%; 2 lights = 50%; 1
light = 25%
3. Charging power bank:
Connect the power bank with a DC USB port. Plug the micro USB
cable to the power bank for recharge. The white indicator light will
flash when charging in progress. The indicator lights are
permanently lit when the power bank is fully charged.
Specification
Input:
Output:
Capacity:
Power efficiency:
Charging time:
Cycle life:
- When connecting the power bank to the device, please use
cables/connectors provided from the authorized maker. The
use of cables or connectors from unauthorized maker may
cause severe or fatal injuries and property losses, and damage
to the product and the device.
DC5V/1A
5V/1A
4000mAh
70%
4-5 hours approximately
500 times