Publicidad
Ignition OFF
Ignition ON
Ignition ON
Ignition ON
Ignition ON
Indicator failure detection and lamp substitution if the trailer indicators fail
The failure of a single or on both trailer indicators will be shown depending on the type of vehicle and electric kit installed as follows:
• Increase in the flashing frequency
• Text message in the Display / combi-instrument
• Activated control lamp for light failure
• Audible warning via Buzzer or Voice-Message
If an indicator fails the left or right rear light compensates the faulty indicator by flashing at the correct frequency! (
/
87010984/15.01.2018
PFJones ltd, Nuttall street, Old Trafford, Manchester, M16 9JA, Tel- 0161 872 4755 email- info@pfjones.co.uk web- www.pfjones.co.uk
Diagnosis function of control LEDs
GN
RD
GN
GN
RD
or
RD
RD
=
No CAN-Data
CAN-Data Wire
/31:
B+/30:
PIN 2 or PIN 4
Standby /
Sleepmode
PIN 13+14
PIN 1
lamp substitution).
13/14
Publicidad
