GE AGM05 Manual Del Propietario E Instrucciones De Instalación página 12

Window Installation Instructions
4
Install Two Support Brackets
Mark the centerline of the sill. Measure and
A
mark the locations for the support brackets
8" from both sides of the centerline.
Place two support brackets on the sill, against
B
the back edge of the stool with their holes
centered on each 8" mark.
Attach them to the sill with 1 Type B screw
C
through each support bracket.
5
Install the Air Conditioner in the Window
Center the air conditioner in the window with
A
the bottom mounting rail between the window
stool and the support brackets.
Top mounting rail
Bottom
mounting rail
12
Window
1/3 bubble
Support brackets
Outside
Type B screw
Sill
Support
bracket
Close the window. Make sure the window sash
B
is behind the top mounting rail of the air
conditioner. It should be level or slightly tilted
to the outside. Use a level; about 1/3 bubble
will be the correct case slant to the outside.
Type A
screws
Extend the sliding panels to fill the window
C
opening and use 4 Type A screws to secure
them, 2 on each side.
Type B screw
Inside
Stool
Support
Outside
bracket
Type A
screws