ELECTROTEK ET-PSK250 Manual De Instrucciones página 9

Bluetooth device connection.
- Turn on the speaker and activate the bluetooth of the external device to pair.
- Search in the external device for the speaker model "ET-PSK250" and select.
- Once the device is paired, you can now listen to music on the speaker.
- Each time you turn on the speaker it will connect to the device automatically as long as
The device has Bluetooth enabled.
- To pair a new device, you have to deactivate the bluetooth of the previous device
and activate the bluetooth of the new device to pair.
- To change songs, pause, increase or decrease volume, see "Front Panel" (previous section).
Note.
When you turn on the speaker, it goes directly into Bluetooth mode, as long as there is no
no TF card and no Pendrive put.
Usb Port / TF Card.
- Turn on the speaker and by default it will enter bluetooth mode.
- If you already have a TF or Pendrive card, you will be able to play their music.
- Insert a pendrive or TF card (MicroSD), with Mp3 music and Fat32 format.
- The speaker will start playing music automatically.
- To change songs, pause, increase or decrease volume, see "Front Panel" (previous section).
NOTE.
It only supports up to 32GB of external memory (Pendrives / TF Cards).
FM Radio.
- Turn on the speaker and by default it will enter bluetooth mode.
- If you have a TF or Pendrive card, you will be able to play their music.
- Press the "M" button slowly until the FM mode is selected.
- To change songs, pause, increase or decrease volume, see "Front Panel" (previous section).
NOTE:
If the reception of the station is not good, connect a Micro USB cable and leave the other end loose.
This cable will do the antenna function.