Perel PIR600 Manual Del Usuario página 7

5.5 Setting the Detector
1. Turn the LUX knob until the lamp switches on.
2. Now, set the switch-off delay with the TIME knob going from
± 10 seconds to ± 7 minutes.
3. Close the detector with the cover and tighten the screw.
6. Cleaning and Maintenance
The detector does not need any particular maintenance. However,
occasionally wipe it with a damp cloth to keep it looking new. Do not
use harsh chemicals, cleaning solvents or strong detergents.
7. Technical Specifications
power supply ....................220-240 V~, 50 Hz, 6 A max.
detection range ............................ 12 m max (< 24 °C)
detection angle ................................................... 180°
light control ............................. 3-2000 lux (adjustable)
installation height ........................................ 1.8-2.5 m
power consumption ............................................ 0.5 W
motion speed detection ............................. 0.6-1.5 m/s
working temperature .......................... -20 °C to +40 °C
working humidity ....................................... < 93 % RH
max. rated load
resistive ..................................................... 1200 W
inductive ...................................................... 300 W
V. 04 – 12/04/2017
PIR600
7 ©Velleman nv