Greencut GM650XB Manual De Instrucciones página 79

2. Insert the throttle grip into the aluminium bar and tighten the screws.
3. Replace the drive connection piece.
TRANSMISSION SUPPORT
1. Align the drives, checking that the position of the internal shafts allows for coupling between them.
2. Insert the flexible transmission into the joint and tighten the bolt that acts as a pin to prevent it from
disengaging.
GRIP HANDLE MOUNTING
1. Use the 4 M5x35 screws and the 5 M5 nuts. First place the nuts on the bottom of the grip.
2. Attach both parts of the grip to the anti-vibration rubber and tighten the screws until they are sufficiently
firm.
79
EN