29. Separate the AC/DC Adapter from USB Hub (19) and feed the USB cord through the cutout on Right Side
Panel (C), then route it through the semi-circular cutout on the Back Panel (D).
30. Snug fit the USB hub (19) into the cutout ensuring the wire is not pinched. Secure it into place with two 12
mm Screws (6).
31. Connect the USB cord with AC/DC Adapter and insert the two-prong plug into an outlet to supply power.
Assembly Instructions
C
x 1
32
19
19
19
19
6
C
⑥ x 2