Descargar Imprimir esta página

Panasonic TX-48C320E Manual De Funcionamiento página 16

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Power Up Mode
Virtual Remote
CEC
CEC Auto Power
On
Speakers
Install and Retune Menu Contents
Automatic
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations.
channel scan
Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
analogue stations.
(Retune)
Manual
This feature can be used for direct broadcast entry.
channel scan
Network
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan
network channels. Digital Cable: Searches for cable network channels.
Analogue fine
You can use this setting for fine tuning analogue channels. This feature is not available if no
tune
analogue channels are stored.
Installation
Displays installation settings menu. Standby Search (Optional): Your TV will search for new
Settings
or missing channels while in standby. Any new found broadcasts will be shown.
Clear Service
Use this setting to clear channels stored. This setting is visible only when the Country option
List
is set to Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed
Network
in the channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation
This setting configures the power up mode preference. Last State and Standby
options are available.
Enable or disable the virtual remote feature.
With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV
and switch to its input source automatically. Press Left or Right button to enable or
disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier.
You can use the remote control of the TV to control the volume of the audio device.
English - 16 -

Publicidad

loading