DOREL ASIA DA1008TFBB-1 Instrucciones De Montaje página 15

TWIN/FULL BUNK BED
DA1008TFBB-1, DA1008TFBB-2
J
I
STEP 7
Insert barrel nuts (9) into the top side rails (I and J).
Insert wood dowel (7) into each end of the long guardrails (M).
Attach top side rails (I and J) to the top posts (A, B & C) as shown above with joint
connectors (1) and barrel nuts (9).
Attach long guardrails (M) to the top posts (B & A) with wood joint connectors (3).
Tighten the joint connectors (1) and wood joint connectors (3) with the hex key (8).
Note: This is the upper bunk.