Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Instruction Manual
Models: MT780
1
8
1
6
1
4
1
7
1
5
EXTREMELY FLAMMABLE. CONTENTS UNDER PRESSURE.
Take precautions not to heat fuel tank.
Contains flammable gas under pressure. Do not expose the torch or fuel to temperatures exceeding 120°F/49°C or prolonged sunlight.
Never use torch in or around flammable fumes, liquids, or explosive materials.
Never pierce fuel tank or expose torch to fire.
Do not breathe gas, fumes, vapor or spray. If inhaled, remove affected person to fresh air.
Avoid contact with eyes or skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. For skin contact, flush with
large amounts of water.
Do not modify torch in any way. Do not alter factory settings. Serious injury or death can result from adjusting factory settings or modifying factory fitted
parts. Always use manufacturer recommended replacement parts.
Read and understand refueling instruction before refueling torch. Refueling the torch incorrectly can result in serious injury or death.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to www.P65Warnings.ca.gov. Wash hands after handling.
Keep torch out of reach of children and anyone who has not read instructions. Do not point torch towards face, other persons or flammable objects. Never
attempt to use torch as a cigarette lighter
Always wear eye protection and gloves when lighting and using the torch.
To avoid risk of damage to torch, always protect torch from impact and never allow torch to drop onto floor or hard surfaces. Never use a torch that
appears to be damaged.
Heating a surface may cause heat to be conducted to adjoining surfaces that may be combustible or become pressurized when heated. Always check to
make sure no unintended parts or materials are being heated.
Do not use a leaking, damaged or malfunctioning torch. If torch is leaking, contact manufacturer or retailer.
Work only in well ventilated areas. Avoid the fumes from fluxes, lead-based paint, and all metal heating operations. Be careful to avoid fumes from
cadmium plating and galvanized metal- remove these coatings in the area to be heated by filing or sanding prior to heating.
Ignite torch away from face, hands, clothing, or other flammable material.
Extremely hot air escapes from exhaust ports on soldering tip assembly. Always rest torch on the stand supplied, even during short breaks, to avoid risk
of damaging work surfaces or other flammable items. Extinguish torch during longer breaks. Never point exhaust ports toward eyes, face, hands, or other
flammable items.
Use caution when operating the torch outdoors on sunny or windy days. Bright sun makes it impossible to see the torch's flame. Wind may carry the
torch's heat back towards you or other areas not intended to be heated. Windy conditions may also cause sparks to be blown into other areas with
combustible materials.
Burner nozzle and tip assembly become extremely hot during use and remain hot after extinguishing the torch. Take precautions not to touch torch tip until
torch has cooled.
Never use the torch on or near combustibles (fuels, rags, towels, paper products, etc.). Be careful around motor vehicles or any gasoline-fired products
and beware of hidden fuel lines and tanks.
Always make certain the torch is resting on level surface to reduce the risk of accidental tip over. Be sure the torch is not pointed in a direction which
could cause nearby objects to ignite when the torch is set down.
Never leave the torch unattended when lit.
Never attempt to repair or heat a gasoline tank, a chemical drum an aerosol can, a compressed gas container that held flammable liquid or gas or any
other chemical. Heating these is extremely dangerous, especially after they have been "emptied".
Department of Transportation Hazardous Materials Regulations forbids the carriage of butane or other flammable gas products on passenger aircraft. Do
not pack this item or any other flammable gas item in any checked or carry-on baggage.
Make sure torch is completely extinguished after use.
Ensure that torch is completely cool before storing.
Always have a fire extinguisher and a bucket of water near the torch and work area.
DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS | NE PAS JETER CES AVERTISSEMENTS ET CES INSTRUCTIONS
NO DESECHE ESTAS ADVERTENCIAS E INSTRUCCIONES | NÃO DESCARTE ESTES AVISOS DE ATENÇÃO E INSTRUÇÕES
1
3
1
2
1
1
ENG
DANGER
FRA
DANGER
ESP
PELIGRO
POR
PERIGO
ENGLISH | ANGLAIS | INGLÉS | INGLÊS
DANGER
This torch is used with a flammable product. Failure to comply
with these warnings and instructions may result in an explosion
or fire that may cause property damage, serious personal injury
or death.
Read and comply with the instructions and warnings in this
manual and familiarize yourself with the torch before lighting and
using. Review instructions and warnings periodically to maintain
awareness. Do not try to operate before reading instructions.
FIRE
EXPLOSION
FUMES
INCENDIE
EXPLOSION
VAPEURS
FUEGO
EXPLOSIÓN
VAPORES
INCÊNDIO
EXPLOSÃO
VAPORES

Publicidad

loading

Resumen de contenidos para Mag-Torch MT780

  • Página 1 VAPORES PERIGO INCÊNDIO EXPLOSÃO VAPORES Models: MT780 ENGLISH | ANGLAIS | INGLÉS | INGLÊS DANGER This torch is used with a flammable product. Failure to comply with these warnings and instructions may result in an explosion or fire that may cause property damage, serious personal injury or death.
  • Página 2 REFILLING OPERATION 1. Use only Butane fuel when refilling torch. 2. Ensure that the torch is extinguished before refilling. 3. Allow sufficient time for torch to cool to room temperature before refilling the torch with fuel. 4. Refill torch in a well ventilated area free of fire or other sources of ignition and away from people. 5.
  • Página 3 ADDITIONAL WARNINGS • Before using as soldering iron or hot air blower ensure that soldering tip locking screwis securely tightened. • Before each use and after refilling, listen for leaking. Never use a flame to check for leaks. Always use torch in a well-ventilated and spark-free area and where there are no open flames.
  • Página 4 VAPORES PERIGO INCÊNDIO EXPLOSÃO VAPORES Models: MT780 FRENCH | FRANÇAIS | FRANCÉS | FRANCÊS DANGER Ce chalumeau est utilisé avec un produit inflammable. Le non-respect de ces avertissements et de ces instructions peut provoquer une explosion ou un incendie qui pourrait causer des dommages matériels, des blessures graves ou la mort.
  • Página 5 T2200 ST200 ST500 - 1000 • Ne jamais tenter de réparer ou de chauffer un réservoir à essence, un récipient de produits chimiques, un aérosol, un contenant de gaz comprimé qui a contenu un liquide, un gaz ou tout autre produit chimique inflammable. Chauffer ce type de contenants est extrêmement dangereux, surtout lorsqu’ils sont « vides ».
  • Página 6 REMARQUE : Pour un fonctionnement optimal, visser la PANNE (7) à bloc sur le fer à souder. Serrer à la main uniquement. UTILISATION COMME SOUFFLEUR À AIR CHAUD Assembler l’appareil comme fer à souder (voir ci-dessus). Retirer la PANNE (7) en la desserrant dans le sens antihoraire. REMARQUE : Il est parfois difficile d’enlever une panne n’ayant jamais servi.
  • Página 7 VAPORES PERIGO INCÊNDIO EXPLOSÃO VAPORES Models: MT780 SPANISH | ESPAGNOL | ESPAÑOL | ESPANHOL PELIGRO Este soplete se usa con un producto inflamable. Si no se cumplen estas advertencias e instrucciones, se puede producir una explosión o un incendio que pueden causar daños materiales, lesiones corporales graves o la muerte.
  • Página 8 • Nunca intente reparar o calentar un tanque de gasolina, un tambor de productos químicos, una lata de aerosol, un recipiente de gas comprimido que haya contenido un líquido o gas inflamable o cualquier otro producto químico. Calentarlos es extremadamente peligroso, particularmente luego de haberlos “vaciado”.
  • Página 9 NOTA: Para obtener el mejor rendimiento, asegúrese de que la punta esté firmemente instalada en el CONJUNTO DE LA PUNTA DE SOLDADURA (7). No use herramientas para apretar la punta. USO COMO SOPLADOR DE AIRE CALIENTE Ármelo para usar como soldador (consulte los párrafos anteriores). Para retirar la punta del CONJUNTO DE LA PUNTA DE SOLDADURA (7), gírela en el sentido contrario al de las agujas del reloj.
  • Página 10 VAPORES PERIGO INCÊNDIO EXPLOSÃO VAPORES Models: MT780 PORTUGUESE | PORTUGAIS | PORTUGUÉS | PORTUGUÊS PERIGO Este maçarico é usado com um produto inflamável. Não seguir as instruções e os avisos de atenção pode provocar uma explosão ou incêndio que pode causar danos materiais, acidentes pessoais graves ou morte.
  • Página 11 T2200 ST200 ST500 - 1000 • Nunca tente reparar ou aquecer um tanque de gasolina, um tambor com produto químico, uma lata de aerossol ou um recipiente de gás comprimido que conteve algum líquido inflamável, gás ou outro produto químico. Aquecer esse tipo de recipiente é extremamente perigoso, principalmente quando estiver “vazio”.
  • Página 12 OBSERVAÇÃO: para obter o desempenho ideal, verifique se o bico está firmemente preso ao CONJUNTO DO BICO DE SOLDAGEM (7). Não use ferramentas para apertar o bico. USO COMO UM SOPRADOR DE AR QUENTE Monte para uso como ferro de soldagem (consulte acima). Remova o bico do CONJUNTO DO BICO DE SOLDAGEM (7) girando-o no sentido anti-horário.