Publicidad
Idiomas disponibles
Idiomas disponibles
fEATURES
PRODUcT SPEcIfIcATIONS
Operating Pressure............................................. 70-120 psi
Fastener Type ........................................... 18 gauge staples
Fastener Range .......................................3/8 in. to 1-1/2 in.
Crown Width .............................................................. 1/4 in.
Magazine Capacity ............................................ 100 staples
Air Consumption.............................0.04 ft
KNOW YOUR fINISh STAPLER
See Figure 1, page 16.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADJUSTAbLE EXhAUST
The exhaust can be adjusted to a variety of positions
depending on operator preference.
bELT hOOK
The hook will rotate to either side of the tool and can be
used to hang the tool from a belt when disconnected and
not in use.
bOTTOM-LOADING MAGAZINE
The bottom-loading magazine allows easy three-step re-
loading of staples.
cONSTRUcTION RULER
A construction ruler located along the left side of the maga-
zine allows the operator to make quick measurements while
working.
DEPTh Of DRIVE ADJUSTMENT
The tool-free depth of drive adjustment lets the operator
select precise driving depth of the fastener.
DRY-fIRE LOcKOUT
The dry-fire lockout feature keeps the tool from operating
when fasteners are low in the magazine to prevent missing
fasteners in the nail pattern and extend tool life.
Air Inlet .............................................................. 1/4 in. NPT
Weighted sound impulse power level ....................91.9 dBA
Emission sound pressure level ..............................79.6 dBA
Vibration ............................................................... 1.69 m/s
Weight ......................................................................2.8 lbs.
/cycle at 100 psi
3
IN-hANDLE AIR fILTER
The self-cleaning in-handle air filter helps keep debris out
to extend the life of the tool.
INTERNAL PISTON cATch
The internal piston catch delivers consistent driving power.
MUffLER
The muffler reduces noise during operation.
NO-MAR PAD
The no-mar pad prevents marring and denting when using
the tool on softer woods.
OIL-fREE DESIGN
The oil-free design of the tool eliminates daily oiling and
prevents oil splattering on work surfaces.
OVERMOLD GRIP AND TRIGGER
The overmold grip and trigger offer increased comfort and
control of the tool.
qUIcK-cONNEcT SWIVEL cONNEcTOR
The quick-connect swivel connector helps prevent hose
tangles.
SELEcTAbLE TRIGGER
The selectable trigger lets the operator choose between
Contact Actuation for higher productivity and Single
Sequential Actuation for precise fastener placement.
8 – English
2
Publicidad
