Descargar Imprimir esta página

Samsung HW-K651 Manual Del Usuario página 7

Ocultar thumbs Ver también para HW-K651:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)
1. Turn on your Samsung TV and the Soundbar.
2. Select TV mode in your Soundbar display by pressing the
the SOURCE button on your remote control. (Modes are displayed in the following order: D.IN → AUX →
HDMI → BT → TV.)
3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote
control.
Select <Yes> with your TV remote control.
4. The Soundbar outputs TV sound.
c If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select
Add New Device, and set Add New Device to ON. Then, try again.
c If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the volume
with the Soundbar's remote or the TV's remote. You can also have the Soundbar turn on and off automatically
when you turn the TV on or off by setting the Bluetooth POWER On function to On. See page 18.
c The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since 2012.
c If you want to disconnect the existing connection to your TV and establish a new connection to another TV,
press the & button on your remote control for more than 5 seconds.
c In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
c Do not place electronic devices or metallic objects on top of the product.
e.g., Wired/wireless router, set-top box, or modem.
c Placing the product on the floor may degrade wireless network performance, depending on the floor material.
button on the right side of the Soundbar or
Samsung Audio Device detected.
Do you want to hear TV sound
through this device?
Yes
· 7 · English
No

Publicidad

loading

Este manual también es adecuado para:

Hw-k650