Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
4632015COM
2 Door / 1 Drawer Base Cabinet
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Easy
Assembly Difficulty Meter
For the latest information on SystemBuild products
follow us at Ameriwood Home
B344632015COM0
Tough
You
Tube
Publicidad
Manuales relacionados para Systembuild Evolution 4632015COM
Resumen de contenidos para Systembuild Evolution 4632015COM
- Página 1 4632015COM 2 Door / 1 Drawer Base Cabinet B344632015COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com...
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Tube Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
- Página 4 Board Identification Not actual size Adjustable Shelf Shelf 32484015060 31117015030 Left Panel Right Panel Bottom Door (x2) 32484015010 32484015020 31117015040 34632015070 SIDE BACK Drawer Front Drawer Bottom Drawer Side (x2) Drawer Back 34632015080 39991341052210D 39991167346200C 39991167051390B This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit.
- Página 5 Board Identification Not actual size SIDE BACK SIDE systembuild.com Tube...
- Página 6 Part List Actual Size (x10) (x4) (x4) (x4) (x4) (x4) #A12120 #A80250 #A22620 #A22610 #A21660 #A23030 7/16" round shelf support cam lock wood dowel confirmat screw cam bolt head screw (x2) (x10) (x4) (x2) (x4) #A11160 (x34) #A11080 #A17400 5/8" flat #A89020 #A21110 #A21970...
- Página 7 Part List Not actual size (x3) (x1) (x4) #A52395 #A54900 #A65615 handle drawer brace hinge left cabinet member right cabinet member (x2) #A54520 drawer bracket left drawer member right drawer member (x1) #A56770 drawer slide kit (x4) #A44140 foot systembuild.com Tube...
- Página 8 STEP 1 marked with "L" left cabinet member (x2) (x3) (x1) marked with "L" systembuild.com Tube...
- Página 9 STEP 2 marked with "R" right cabinet member (x2) (x1) (x3) marked with "R" systembuild.com Tube...
- Página 10 STEP 3 Quick Assembly (x4) (x1) (x4) Proper orientation of CAM LOCK Do not tighten screw. systembuild.com Tube...
- Página 11 STEP 4 (x2) (x2) (x8) (x4) (x4) bottom surface top surface Unscrew the two halves of the foot. Attach bottom half to bottom (D) and screw top half back on. systembuild.com Tube...
- Página 12 STEP 5 All finished edges will face up. systembuild.com Tube...
- Página 13 STEP 6 (x4) All finished edges will face up. systembuild.com Tube...
- Página 14 STEP 7 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. (x34) Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square. Distance from corner to corner must be equal as shown. "raw surface shown"...
- Página 15 STEP 8 (x4) (x2) (x4) systembuild.com Tube...
- Página 16 STEP 9 (x4) (x2) SIDE SIDE side view side view systembuild.com Tube...
- Página 17 STEP 10 (x4) Be sure the groove in the drawer sides are centered with the groove in the drawer front SIDE SIDE systembuild.com Tube...
- Página 18 STEP 11 SIDE finished surface SIDE systembuild.com Tube...
- Página 19 STEP 12 You will need to tap the drive fasteners (8) (x4) lightly with a hammer to securely fasten. BACK SIDE SIDE systembuild.com Tube...
- Página 20 STEP 13 left drawer member right drawer member (x1) (x2) (x4) (x1) Note: Attach slides (22c&22d) first then attach handle. BACK SIDE SIDE systembuild.com Tube...
- Página 21 STEP 14 (x1) (x2) Turn drawer over. Using two screws (6), attach the drawer brace (19) as shown. BACK systembuild.com Tube...
- Página 22 STEP 15 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Página 23 STEP 16 Attach the two doors as shown by screwing the screws from the hinge plate into the side panels. See step 18 for instructions on how to adjust the doors if needed. systembuild.com Tube...
- Página 24 STEP 17 Install the drawer as shown below. Follow adjustment details below to adjust drawer. Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. roller cabinet member drawer runner roller systembuild.com Tube...
- Página 25 STEP 18 Door Adjustment To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust side to side: Loosen the screw "C"...
- Página 26 STEP 19 Using the shelf supports (5), place the adjustable shelf (F) behind the door area. (x4) systembuild.com Tube...
- Página 27 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 25 lbs 11.3 kg 50 lbs 22.6 kg 50 lbs 22.6 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
- Página 28 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Página 29 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 30 Español Página 10 No apriete el tornillo. Página 11 Desenrosque las dos mitades del pie. Pegue la mitad inferior a la parte de abajo (D) y atornille de nuevo a parte superior. Página 14 ¡IMPORTANTE! EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y SE DEBE INSTALAR DE MANERA APROPIADA.
- Página 31 Español Página 22 ADVERTENCIA El volcamiento del mobiliario podría causar lesiones graves o fatales, por aplastamiento. Para evitar volcamientos: * Instale el dispositivo de fijación proporcionada * Coloque los artículos más pesados en las gavetas inferiores * A menos que esté específicamente diseñado para tal fin, no coloque televisores u otros objetos pesados en la parte superior de este producto OPCIÓN 1: Conexión a un montante (método preferido) Mediante un detector de montantes, ubique un montante en la pared.
- Página 32 Español Página 25 Para ajustar la altura vertical: Afloje los tornillos "A" en ambas bisagras. Por lo general, están en agujeros ranurados que le permite ajustar hacia arriba o hacia abajo por unos pocos mm. A continuación, apriete de nuevo. Para ajustar la profundidad: Afloje el tornillo "B"...
- Página 33 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à...
- Página 34 Français Page 10 Ne serrez pas la vis. Page 11 Dévissez les deux moitiés du pied. Fixez la moitié inférieure au bas (D) et vissez la moitié supérieure à nouveau. Page 14 IMPORTANT! LE PANNEAU ARRIÈRE FAIT PARTIE STRUCTURELLE DE CETTE UNITÉ ET DOIT ÊTRE INSTALLÉ...
- Página 35 Français Page 22 ATTENTION Des blessures graves ou mortelles par écrasement peuvent survenir suite au renversement d'un meuble. Pour éviter les renversements : * Installez la retenue de renversement fournie * Placez les objets les plus lourds dans les tiroirs les plus bas * Sauf si spécifiquement conçu pour les accueillir, ne placez pas de téléviseurs ou autres objets lourds sur le dessus de ce produit OPTION 1 : Fixation dans un montant mural (méthode préférée)
- Página 36 Français Page 25 Pour ajuster la hauteur verticale : Desserrez les vis "A" sur les deux charnières. Ils sont généralement dans des trous à fentes qui vous permet de s'ajuster vers le haut ou le bas de quelques mm. Puis resserrez-vous. Pour ajuster la profondeur : Desserrez la vis "B"...