Steren CCTV-194 Manual De Instrucciones

CCTV digital high definition
dome camera
SEGURIDAD
Instruction manual
V0.1
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
The instructions of this manual are for reference about the
product. There may be differences due to updates. Please
check our website (www.steren.com) to obtain the latest
version of the instruction manual.
• Do not use or store the equipment in places where there dripping or
splashing water; it may cause a malfunction.
• Do not install near heat sources or electromagnetic noise (electric
motors, electric fences, power switches, etc.).
• Do not install outdoors.
• Do not install the wiring inside of a pipe where power lines are located,
as this may distort the image.
• To capture images and videos in high quality, be sure to make the connections correctly.
• For distances under 100m use Cat5e UTP cable.
• If you use coaxial cable, the distance should not exceed 50 m.
• The camera must be connected into a no break, to protect it from electrical shock and to
keep it running in case of an outage.
With this CCTV digital camera you can watch any place you want securely and with
discretion, getting really sharp images.
It can transmits analogue and digital signal, so you can plug it into any video recorder (DVR)
or screen. It features IR LED and sensor light to offer you night vision.
It has been designed to install it where you want, easily. Besides, the multi-position base
allows you to aim it easily in the direction you want.
* Analogue / Digital video
* Night vision
* Anti-rust aluminum case
* Automatic gamma control and white balance
C
B
D
E
F
G
INSTRUCTIONS
Installation
1
Select the location where you want to
install the camera. It is recommended to
be on a solid surface and fixed (wall,
roof, carport or under an overhang).
2
3
Use the base to
mark.
4
CCTV-194
IMPORTANT
CAUTIONS
HIGHLIGHTS
PARTS
A
Infrared LEDs
A
B
Lens
C
Sensor
D
Case
E
Mounting base
F
Power connector
G
Video connector
H
Analog mode wire
H
5
6
7
A B
Connection
0116m
If you wish to work in analog
mode, connect the white and
blue wires to a switch.
Trouble
Cannot see
images
Image with interference
Image with color changes
Input: 12V - - - 1 A
Minimum lux: 0.01 lux/F1.2
Format: AHD 1280 x 720
Image sensor: color CMOS
Video output: BNC
Resolution: 1.0 Mega Pixel
Operating temperature: -10°C to 50°C
Product design and specifications are subject to change without notice.
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice, product box or
package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was
received.
4. Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky
batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel,
improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer __________________________________
Address ____________________________________________
Product ____________________________________________
C
Brand ______________________________________________
Be sure to connect the camera to a
digital port.
MAINTENANCE
TROUBLESHOOTING
Solution
• Turn on the DVR or monitor.
• Make sure that have made correctly all connections to the
camera and the monitor or DVR.
• Check that the power supply is undamaged.
• Check the wiring; It could be damaged.
• Try another power source; it could be damaged.
• Make sure the wiring is in good condition.
• Check for unstable connections.
• Make sure the camera is not placed near a fluorescent
lamp.
SPECIFICATIONS
Product:
CCTV digital high definition dome camera
Part number: CCTV-194
Brand: Steren
In case your product
fails or have questions,
please contact your
nearest dealer. If you
are in Mexico, please
call to our Call Center.
01 800 500 9000