NeuLog NUL-239 Guía General página 22

Electrode storage
Short term (overnight or weekend):
Rinse the electrode thoroughly with deionized water and
place the tip in a diluted standard solution (around 10
ppm) between measurements.
Long term:
Rinse the electrode thoroughly with deionized water and
blot dry. Attach the hard plastic protective electrode cap
again to protect the sensing element. Follow procedures
in the "Electrode preparation" section when using the
electrode again.
Included with sensor
 NeuLog General Guide.
 NeuLog chloride (Cl
 Chloride (Cl
 Chloride (Cl
Range and
operation modes
ADC resolution
Resolution
Max sample rate (S/sec)
Experiment Duration: 1 second to 31 days.
V2018.02
-
) sensor electrode.
-
) Ionic Strength Adjuster (ISA).
-
) 1000 ppm standard.
Sensor specifications
1.08 to 35,500
0.4 mg/L at 1.8
to 1,000 mg/L
40 mg/L at 1,000
to 35,5000 mg/L
22
mg/L
15 bit
40 ppm at 1,000
to 35,5000 ppm
100
Home
ppm
1.08 to 35,500
0.4 ppm at 1.8
to 1,000 ppm
English