Brite-Nite
R600 LED Spotlight
™
CHARGING THE INTERNAL BATTERY
Please charge before initial use. In order to prolong the life of the battery, be sure
to fully recharge the unit every 3 to 6 months, even if the unit has not been used.
1. Connect the micro-USB end of the USB cable to the spotlight's input port.
2. Plug the other end of the cable into a USB power port such as a USB wall
charger, USB car charger or power bank.
3. The charge indicator LEDs will illuminate red while charging and will turn
green when fully charged (about 4 hours).
3
by Wagan Tech
™
www.wagan.com
®