Publicidad
Idiomas disponibles
Idiomas disponibles
3&4
Step 4. Place the log burner onto the ash tray and attach lid.
-Place the log burner onto the ash tray (9).
-Place the lid (1) onto the log burner.
Step 5. Tighten all nuts and bolts.
MAINTENANCE
AND CARE
We recommend a check on all fixing points to make sure they remain fully tightened after 2 or 3 uses and
periodically.
DO NOT use water on the burner while it is hot as this will damage the metal finish.
Always clean the burner after each use when cooled with warm soapy water. Do not use chemicals or
abrasive cleaners.
We recommend the burner to be covered when not in use and store in a cool dry place that is not indoors.
Use a suitable fire pit cover when not in use.
DO NOT put any part of the fire pit in a dishwasher.
Step 3. Attach the legs to the main body
-Attach the four legs (6) to the inside of bottom ring (8) using screws
(A) and nuts (B) making sure the bottom of the leg are facing out.
-Attach the legs (6) to the main body plates which have the five
holes, placed at 4,
8, 12, and 16,
using screws (A)
and nuts (B).
al □
!
B
Publicidad
