GB
To set the stamp wheels Fig.
Press the handle
travel and keep holding it.
Press and hold button
Allow the handle
the handle locks in place.
You will be able to move the stamp wheels
freely with the stylus
In order to return to the print position,
simply push down on handle
You can easily place the date one day
further ahead!
Press the switch button
This applies to the stamp H49bZ:
To advance the date by one day, press
the larger switch button once.
To advance the time by one hour, press
the smaller switch button once.
To insert the inkpad Fig.
Note: Use only oil-containing stamp ink.
Handle with caution to avoid dirt from ink!
Press the handle
travel and keep holding it.
Press the button
continue to hold it.
Allow the handle
the handle locks in place.
Unpack the inkpad carefully.
Squeeze the grips
inkpad and hold them.
1
+
2
+
to the bottom of its
on the front plate.
to move upwards until
.
.
once.
1
4
+
to the bottom of its
on the front plate and
to move upwards until
on the back of the
Insert the ink pad inside the pad cradle.
3
Slide the pad into the slot
In order to return to the print position,
simply push down on handle
To park the stamp Fig.
To prolong the life of the inkpad,
park the stamp!
Press and hold button
Gently push handle
stamp clicks & locks in a raised position.
In order to return to the print position,
simply push down on handle
GB
of the stamp.
.
5
on the front plate.
downwards until the
.