Publicidad
Idiomas disponibles
Idiomas disponibles
Operating the Remote Control
EN
1.
POWER: When the standby LED indicator is red (Power switch is On), press the Power button. The
DE
red standby LED will switch off and the speakers will be ready to play audio.
FR
2.
MUTE: Audio will be muted and the LED indicator will flash red.
3.
AUX: Press
ES
4.
RCA : Press
IT
5.
Bluetooth: Press
When successfully paired, the LED will become solid blue.
6.
Previous Track
7.
Play/Pause
8.
Next Track
9.
Volume +
10.
Volume -
Note:
1. The Previous Track
, Play/Pause
and Next Track
2. The remote control comes pre-installed with a battery. Please remove the plastic film insert from the remote control when using for the first time.
Replacing the Battery
1. Pull out the battery holder from the slot at the bottom of the remote control.
2. Remove the old battery from the battery holder and replace it with a new CR2025 battery (with positive polarity facing up as described on
the marks on the remote).
3. Push the battery holder back into the slot at the bottom of the remote.
Included Items
1 x Speaker Set
1 x Connecting Cable
1 x Dual RCA to Dual RCA Audio Cable
1 x 3.5mm to 3.5mm Audio Cable
1 x Remote Control
1 x Instruction Manual
Before using the 2.0 Multimedia Speaker System for the first time, check the package contents to ensure all parts are free of visible damage.
to enter AUX mode. The LED indicator will turn green.
to enter RCA mode. The LED indicator will turn green.
to enter Bluetooth mode. The LED will flash blue when Bluetooth is pairing.
buttons are only functional in Bluetooth mode.
6
Connectivity and Operating Guide
Computer
DVD player
Audio Cable
Smartphone
Tablet
Connecting Cable
Power Cable
7
EN
DE
FR
ES
IT
Publicidad
