Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION INSTRUCTIONS
FUNCTION
POWER
HEATER
FAN
OSCILLATION
TIMER
REV-0
ICON
DESCRIPTION
Use the POWER button to turn on or off the fireplace from
the remote or control panel.
NOTE: Holding the POWER button on the control panel for
10 second will disable the heater function. Once disabled the
emberbed will flash several times. To re-enable the heater
press and hold the POWER button for another 10 seconds.
To turn on the heater press the HEATER button. Once
pressed the heater will turn on, the indicator will also be
flashing the current thermostat setting level. Use the
HEATER button to set the desired thermostat level.
The default temperature is 72°F (22°C). The thermostat
setting range is 62°F - 82°F or 17°C - 27°C or continously
ON.
The button on the remote only turns the heater on/off to the
thermostat setting selected with the control panel.
To change between °F and °C press and hold the HEATER
button on the control panel for 10 seconds.
Press the fan button to cycle through the fan intensity
settings between HI and LOW.
Pressing this button will turn on or off the oscillation feature.
When on, the louvers will oscillate back and forth to
distribute the air flow to a wider area.
To set the sleep timer press the TIMER button. Once pressed
the indicator will flash the current timer setting length, use
the TIMER button to adjust the timer length.
Pressing the timer button will cycle through the timer
settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H
and off.
5
www.tsicustomerservice.com
Publicidad
