Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Model #
134Wa
Swivel Barstool
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions and Finishing Hints before you begin your
project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
• For normal household use only. Not recommended for commercial use.
• Do not climb or stand on this piece of furniture.
• Before you begin your project, completely read the Assembly
Instructions and Finishing Hints.
• Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
• Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm.
California Health and Safety Code Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
09/13

Publicidad

loading

Resumen de contenidos para Whittier Wood Furniture Swivel Barstool 134Wa

  • Página 1 Model # 134Wa Swivel Barstool IMPORTANT NOTES: Assembly Instructions • For normal household use only. Not recommended for commercial use. • Do not climb or stand on this piece of furniture. • Before you begin your project, completely read the Assembly Instructions and Finishing Hints.
  • Página 2 134Wa Swivel Barstool — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on parts list below. PART DESCRIPTION QTY. PART DESCRIPTION QTY..... . . Back Posts .
  • Página 3 Fig 6 Fig. 4 TO ATTACH THE LEGS TO THE DISC: Place the disc (B), top side down, on your TO ATTACH THE BACK SPINDLES TO THE work surface. (The top side is marked with SEAT: indentations for attaching the swivel later). Spread glue evenly in the holes in the Seat Spread glue evenly in each leg hole in the (E).
  • Página 4 To insert screw at proper angle, the screw head should be approximately 1/2" from the nearest surface when starting the screw. Fig. 8 For added strength, screw a #8 x 1-5/8" Black Screw (K) through each leg chuck into the Fig.
  • Página 5 Modelo # 134Wa Taburete de bar giratorio NOTAS IMPORTANTES: • Para uso de viviendas normales únicamente. No se recomienda para uso comercial. • No se suba ni se pare sobre esta mueble. Instrucciones de ensamblar • Antes de comenzar su proyecto, lea completamente las instrucciones de ensamblar y las indicaciones finales.
  • Página 6 134Wa Taburete de bar giratorio Lista de piezas Antes de comenzar a armar el mueble identifique las piezas y compruebe que las cantidades recibidas son iguales a las de esta lista. Si necesita reemplazar una pieza, consulte la letra y el nombre del modelo que vienen a continuación.
  • Página 7 EN ESTE MOMENTO, APLIQUE EL ACABADO AL TERMINE DE ARMAR EL TABURETE: BANCO ANTES DE PROCEDER AL PASO 7. Cubra la superficie de trabajo con una tela o pedazo de ASEGÚRESE DE LEER LAS SUGERENCIAS ADJUNTAS cartón para proteger el asiento acabado. Coloque el asiento SOBRE EL ACABADO.
  • Página 8 No. De Modèle 134Wa Tabouret de bar REMARQUES IMPORTANTES : Pivotant • Pour un usage domestique uniquement. Non recommandé pour un usage commercial. • Ne pas monter ni se mettre debout sur cet article d’ameublement. Instructions d’assemblage • Avant de commencer, lire attentivement les instructions d’assemblage et les conseils de finition.
  • Página 9 134Wa Tabouret de bar Pivotant Nomenclature des pièces Avant de commencer le montage, identifiez les pièces et assurez-vous que les quantités reçues correspondent à celles de cette liste. Si vous devez remplacer une pièce, veuillez vous référer à la liste suivante pour le nom et la lettre de la pièce.
  • Página 10 À CE STADE, FINISSEZ LE TABOURET AVANT DE FIN DU MONTAGE DU TABOURET DE BAR : PROCÉDER À L’ÉTAPE 7. Recouvrez votre surface de travail d’un tissu ou d’un VEILLEZ À LIRE LES CONSEILS DE morceau de carton pour protéger le siège fini. Placez le siège FINITION CI-INCLUS.
  • Página 11 Whittier Finishing Hints instructions call for a slow drying epoxy glue. Carefully Checklist of materials read the label and instructions of the glue manufacturer. □ □ □ Rubber gloves Tack cloth #220 & #320 Your unit may not need glue. □...
  • Página 12 Whittier Finishing Hints with a lint-free rag or tack cloth between coats. Preparing the surface Sand each piece with #220 grit sandpaper. Sand with Some finishes tend to slightly raise the grain. This can the grain of the wood on flat surfaces and opposite the be easily controlled with a light sanding between coats.
  • Página 13 Consejos de Whittier para terminaciones Consejos de pegado Lista de control de materiales Estos son algunos consejos generales. Consulte las □ □ □ Guantes de Paño de Papel de lija instrucciones de ensamblaje para obtener información detallada hule adherencia No. 220 y No. sobre cómo pegar el producto específico que utilice.
  • Página 14 Consejos de Whittier para terminaciones Consejos para las terminaciones Aplicación de la capa de acabado Utilice productos de la misma marca para garantizar la Siempre debe leer y seguir las instrucciones de la etiqueta. compatibilidad. No se recomienda mezclar terminaciones a Mezcle suavemente el preparado para la capa de acabado, base de solventes y a base de agua.
  • Página 15 Conseils de finition de Whittier Conseils en matière de collage Liste de vérification des matériaux Cette section contient des conseils d'ordre général. Veuillez vous □ □ □ Gants en Chiffon résiné Papier de reporter aux instructions d'assemblage pour des renseignements □...
  • Página 16 Conseils de finition de Whittier enduits de finition à base de solvant et d'eau. Lisez et suivez Lisez et suivez les instructions figurant sur l'étiquette. Mélangez doucement l'enduit de finition; n'agitez pas. Le fait toujours les instructions figurant sur le produit. d'agiter peut entraîner la formation de bulles qui seront par la L'aulne est un bois dur et poreux dont l'aspect est souvent suite difficiles à...