Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION: TO PREVENT ELECTRIC SHOCK,
this product has a polarized two prong plug (one blade is
wider than the other) that must be fully inserted into a
matching properly grounded outlet. This plug is designed to
fit a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If the plug still does
not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
WARNING: Before servicing this fan be sure to unplug fan from wall outlet. Do not only turn off fan from the
main "ON/OFF" switch, be sure to unplug this fan.
WALL MOUNTING:
(Select models only)
This fan comes with an optional wall mounting bracket (packed separately).
1. Use the wall mounting bracket as a template to mark your mounting location before you attach the bracket to the
fan.
Note: Fan should be level when mounted and at least one of the two mounting screw locations should be a wall stud.
2. Place wall mounting bracket on the bottom of the fan and attach it to the fan using the three enclosed screws as
shown in Fig. 1.
3. Place appropriate fastener into wall. Fasteners can be purchased at your local hardware store or home center. The
fastener head must fit properly into mounting holes located on wall mounting bracket. Please leave about 3/8" of space
between the fastener head and the wall surface for the fastener to properly slot into the wall mounting bracket holes.
4. Mount fan with attached wall mounting bracket to fasteners on the wall. Check to be sure that the fan is secure on
the wall as shown in Fig. 2.
Fig.1
INTENDED USE: This product is intended for indoor residential and office use only, not for
industrial or other commercial applications. Use only withelectrical wiring that is in good working
order and that meets applicable codes and ordinances. If you have any questions whether your
wiring is adequate, consult a qualified electrician.
WARNING: ELECTRICAL SHOCK HAZARD Do not use
with damaged cord or plug. Use with adequate
electrical system that is up to code.
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, do not use this product with any solid‑state
speed control device.
~ 3
Fig.2
Publicidad
