PNI SmartHome RG120 WiFi Manual De Usuario página 7

application for the first time.
5. Power the relay with the power supply and the USB cable in the package.
The LED will flash quickly red/blue. Note: If, on the other hand, the LED
flashes rarely, press and hold the button on the relay until the LED flashes
red/blue often.
6. Click the + icon in the upper right corner of the application.
7. From the list of categories on the left, select Electrical, then the Garage
Door Opener (Wi-Fi) option from the list of devices on the right side of
the screen.
8. Check again that the LED on the relay flashes frequently.
9. Enter the wireless network password (activate the GPS location on the
phone if necessary) and continue.
10. The pairing procedure can take several moments. Wait until it completes
successfully. The application will ask you to rename the relay.
If adding the relay fails, repeat the above steps, making sure you have entered
the correct wireless network password and that the LED on the relay flashes
frequently.
The application allows you to open and close the garage door, to make alarm
notification settings in case of open/closed door and to set a certain time when
the door will open/close automatically.
A smart relay can open a single garage
door.
In the application, however, you can
add as many relays as you want for as
many doors or gates as you have.
5