Publicidad
Idiomas disponibles
Idiomas disponibles
441Wa, 442Wa & 445Wa Tables
WE RECOMMEND FINISHING THE UNIT BEFORE ASSEMBLY.
Ca
II
1.
Lay Top Assembly (Ea) face down on a clean protected surface. Place a Leg (Ca) top down in
one of the corners between the aprons so that the hole that has been drilled in one corner is
facing the Leg Bracket (II). Insert the 1/4" x 2" Hex Bolt (G) with Washer (J) through the Leg
Bracket into the metal insert in the Leg and tighten snugly. See Figure 1. Repeat this procedure
for the other three legs.
Continued on page 4
Assembly Instructions
Tools Required: Phillips Screwdriver, Adjustable wrench.
Before finishing, read enclosed finishing hints.
J
G
Fig. 1
IMPORTANT:
Leg brace should
NOT bend back to
touch the leg.
Fig. 1a
Page 3 — 441Wa_442Wa_445Wa — 12/13
Publicidad
